Operation & Maintenance Schedule
WILD-CAT MINI EXCAVATOR
OPERATION & MAINTENANCE SCHEDULE
Compliments of DiscountEquipment.ca
We recommend saving this guide on your mobile phone. It will save you time and help you protect your investment.
FIRST SERVICE RECOMMENDATION
First Engine Oil Change:
We recommend changing the engine oil within 30 hours or less using:
- 15W-40 Diesel Engine Oil
- Add 20% Lucas Oil Stabilizer
This helps maintain peak performance in a new engine.
(Kubota factory recommendation is 50 hours for first oil change.)
REGULAR MAINTENANCE INTERVALS
✔ Engine Oil & Filter
- Every 500 hours or less
- Use 15W-40 Diesel Oil
- Add 20% Lucas Oil Stabilizer
✔ Hydraulic Oil
- Change every 2,500 hours
- Use VG 46 High-Definition Wear-Resistant Hydraulic Oil
- ISO 46 is also acceptable
✔ Hydraulic Oil Filter
- Replace every 1,000 hours or less
✔ Coolant
- Replace every 1 year or 2,000 hours
✔ Hydraulic Hoses
- Inspect regularly for leaks or cracks
- Replace every 4,000 operating hours
✔ Greasing
- Grease daily
- Use lithium grease on all pivot points
DAILY OPERATION CHECKLIST (SAVE THIS)
Before Starting:
- Start engine and allow oil to warm properly
- Check engine oil level
- Check hydraulic oil level
- Check coolant level
- Inspect track tension
- Inspect undercarriage
- Inspect hydraulic hoses
- Check bucket teeth condition
- Check for loose bolts or damage
Every 10 Hours:
- Check engine oil level
- Check hydraulic oil level
- Drain oil-water separator
- Inspect fuel lines for cracks or leaks
- Check work equipment pivots
- Inspect hoses and pipelines
Every 50 Hours:
- Check belts
- Check bolt torque
After Operation:
- Wash machine thoroughly
- Clean undercarriage
- Inspect for damage
- Lubricate pivot points
OPERATING TIPS
✔ Traveling
- Travel at half throttle
- Prevent damage to travel motors
✔ Diesel Fuel
- Use high-grade diesel
- Use winter-rated diesel in cold temperatures
✔ Roof (ROPS Canopy)
- Protects operator
- Protects machine from falling debris
WILD-CAT 1.1 TON SPECIFICATIONS
General Specifications
- Operating Weight: 1,100 kg (2,426 lbs)
- Engine Model: Kubota D722
- Horsepower: 13.5 HP @ 2400 rpm
- Maximum Torque: 51.9 N·m @ 1600 rpm
- Travel Speed: 1.5 km/h
- Maximum Gradeability: 30°
Digging Performance
- Max Digging Radius: 2,980 mm (117.3 in)
- Max Digging Height: 2,620 mm (103.1 in)
- Max Dump Height: 2,000 mm (78.7 in)
- Max Dozer Blade Dig Depth: 325 mm (12.8 in)
- Lifting Capacity: 300 kg (661 lbs)
Dimensions
- Track Length: 1,235 mm (48.6 in)
- Chassis Width: 903 mm (35.5 in)
- Transport Length: 2,225 mm (87.6 in)
- Overall Height: 2,210 mm (87 in)
Hydraulic System
- Pump Type: Gear Pump
- Working Pressure: 16 MPa
- Flow Rate: 18 L/min
- Hydraulic Tank Capacity: 15 L
- Fuel Tank Capacity: 11 L
BILL’S PRACTICAL ADVICE TO OWNERS
The key to long engine life:
- Warm it up properly
- Change oil early
- Grease daily
- Keep tracks adjusted
- Never travel at full throttle
These small habits can easily double machine life.
Bill — this is strong enough to:
- Include with every machine you sell
- Upload as a PDF download on DiscountEquipment.ca
- Print and laminate for customers
- Use as a YouTube “Owner Orientation Guide”